How To Substitute Exterior Sliding Doors

Exterior sliding doors are used to separate the interior of the house that lead out to terraces, pool or garden. Replacing exterior sliding door is not a difficult thing to do when everything is set up properly. Adjusting door replacement, however, can be a little 'difficult. The following article will teach you how to easily replace the sliding doors outside.

Step 1 - Remove the sliding doors Old

Look at the top and bottom of the sliding glass doors. How to remove the exterior sliding doors is to loosen the adjusting screws. Once they are fully sliding doors can be easily lifted off the track. Next must be removed as part of the sliding door. This includes the tracks and the left and right side of the frame. Use an electric screwdriver with the lever, to remove the screws on the metal track and lift. Locate the mounting screws on the left and right side of the frame of the sliding door. There may be a nail strip outside the trim of the house. Remove the backing to control and remove the strip nail if any. You can simply lift the rails out of the frame.

Step 2 - Install the door frame sliding outside

The new sliding doors are equipped with a series of new tracks, and a metal frame. Even though most of them are standard, it is a good idea to use the one that comes with the new sliding door. Carefully read the instructions and follow them to the letter on how to set paths and adjustments for external sliding doors. Use the supplied screws and align the new tracks and the plate with the holes used previously. Use the level to ensure that the tracks are level. Make sure that the tracks are level before screwing in place will save you time and extra work later on the road. Use the electric screwdriver and fix the track and cut in place.

Step 3 - Install the exterior sliding doors

This is the easiest part of installing external sliding doors, but can also be a bit 'boring. Raise one of the doors and place it carefully on the track. You will have to keep it in place when you use the screwdriver to adjust the wheels on the sliding doors outside. Set wheel and the door to sit on the frame without the possibility of falling.

Use the screwdriver to continue to adjust the upper and lower wheels until a good move on the door on the slopes. Now, lift and place the second sliding door on the track and repeat exactly what you did with the first door. Constantly monitors the downward movement of the sliding doors external to ensure that open and close easily. Prepare to be constantly adjusting the wheels until they finally find the right level for each port.