Learn How to Install wood Flooring

If you plan to buy some wood floors and you think you are to install yourself. learn how to install wood flooring

Vote for your cellar and choose the method of installation

The type of wood flooring you choose and how to install it depends on the type of substrate in your property. This is the basis of the speech that will sit on the wooden floor. There are three types of substrate:

1) Concrete / cement / stone
If you have a concrete, cement or stone basement, you can use the solid wood flooring and engineered wood flooring. Solid wood can be nailed or glued to the slatted cellar. Engineered wood flooring can be glued or installed to float.

2) plywood / chipboard
If the basement is plywood or chipboard can use solid wood flooring, nailed or glued. Otherwise, you can float or glue down engineered flooring.

3) chipboard
Always with particle board, you have the choice of hardwood floors or equipped. If you opt for solid wood flooring, must be linked. Engineered wood flooring can be glued or floating.

Floor heating
If you have floor heating, you must choose hardwood floors made of solid wood. This is because it is more durable and able to withstand extreme temperatures. This type of flooring can float or be glued to the floor heating.

Choose your method of flooring and installation

Once you know the type of base in your property, you can choose the equipment and the installation method of those mentioned. For more information on the features and benefits of hardwood flooring and engineered wood, take a look at this recent post. Now you are ready to buy and install the floor.

Set Up

Get down to business and get downstairs. These are the methods you both glue down, nail or floating wood floor:

Glued floor
This type of installation is very safe and does not require that the sections of the floor and a suitable adhesive. Your plan reseller will be able to recommend a glue, which should be applied to your cellar. Then just ask your wood floor. If you have a concrete basement, you should take a waterproof membrane to the second part epoxy moisture to prevent moisture rising. Leave the floor as long as possible before walking on it so that the glue can take effect.

Floating floor
Floating installation is the easiest DIY plan, which is great news if you are a beginner. You must first submit an undercoat to act as a moisture barrier and insulation. Then apply glue to meet the parties Groove and tongue and lay the floor. Repeat until the floor is installed.

Nailed to the floor
If you have a wood subfloor is a perfect way to safely receive a new wooden floor. Plan nail may be the time and hard work, but it is very effective and simple. If you already have the new floor plan should be nailed with axes to go in the opposite direction, through the existing recommendations. If you have a plywood subfloor is not serious. To save time, it might be worth investing in or taking a nail gun, especially if you are installing wood floors in a large space. Another trick is to use a sub-layer of the floor of foam poles to hold in place and to prevent creaking floor.

Read More... Résuméabuiyad

6 Steps of How To Lay Wood Flooring

In this article we will see How to Lay Wood Flooring in six steps you can take you. If you followed my other article on how to lay laminate flooring, and many steps are very similar, but there are some differences when it comes on a wooden floor. If you are nervous about installing wood flooring and DIY skill level generally do not be afraid to ask a friend with more experience can help. Technological advances with hardwood floors make the products are of better quality and easier to fit well.

Before beginning our way to order wood flooring guide, you should ensure that your hardwood floor is left in the room where it will be installed for at least 48 hours before beginning the installation process. This is an important step, as the tables themselves composed of a natural material, should be allowed to acclimate to new levels of temperature and humidity, which will be exposed. As a tip to adapt to the new environment, they will expand or shrink accordingly. Also make sure you clean your basement thoroughly to remove all dirt and small particles that can cause problems when you just put the wooden floor.

Let's start and begin our guide on how to install hardwood floor:

Step 1 - tools for the job

a saw or a chainsaw panel (eg, circular saw)
Tile spacers
Goggles
hammer
feather
square
knee
tape
a sharp cutter
tapping block
a drawbar
adhesive underlay
Step 2 - How your wood floor is measured

To calculate the amount of wood flooring you need for your project, you will need to measure your space to calculate the total area of the square to cover. Wood flooring is available in various pack sizes depending on the variety you buy, and these packages tells you both the size of the company, with a total achievable coverage package. To calculate the number of packets needed wood floor for your project, first measure the width of your room and length. Multiply that by the other to give its size in the area. Uncomfortable rooms can sometimes be difficult to measure, but the best way to try to overcome that to try to divide the space into smaller spaces that can be set and then add the sizes of individual area of these squares together. To calculate the number of containers of wood flooring you need, take the size of the area (which must be in the same units as those used in the packing of soil) and divide that number by the total area covered in a set wooden boards.

It is strongly recommended to buy at least ten percent of estimated additional tips you need for your project recommends. This is to prevent your card missing mid projects in case of errors or wrong measures.

Step 3 - marking on your hardwood floor

Unlike when you ask a tiled floor, no need to mark the position of each piece of wood you ask. However, we recommend that you request a row test before starting the installation of adhesive support. This is to help determine the direction and position start laying the ground, and to help calculate the amount of the end of the line, and you have to cut when it comes down to it. A good tip is to start putting your wood floor in the brightest part of the room. You should try to avoid a design that will result in having to reduce more than 50% away from the depth of his final line cards, or less than 400 mm in width of your advice.

Step 4 - wearing burlap self adhesive

We will install a "floating floor" by the methods used in this tutorial. This means that, technically, the new wood floor is not directly attached to the old ground. This is a very common, effective and perfectly effective to install a hardwood floor. In this spirit, start throwing up with his brilliant above. This is because the bright side is that comprising an adhesive. Make sure you have your keys in place, and you are putting the rolls at an angle of 90 degrees to the way you have your laminated panels; this is to prevent the joints between the sub-layer elements with joints between wood floor element never appropriate. As you place the base layer, make sure there is no gap or overlap between sections that one of them could cause the wood planks sink or standing proud. The goal here is a nice consistent surface. Paste the joint between sections with a bit of tape to hold them in place.

Step 5 - laying wooden floors

Using the design you have established above, first remove a section of the protective film on the bottom layer of half the width of a plank of wood. Then gently place the first board in place (make sure your brakes are still in place). If you are satisfied with the position of the first table, peel most of the protective film to expose the card to the adhesive completely. Similarly, you can continue throughout the room, gradually peeling the adhesive film on the fly.

Most soils have a proper tongue and groove profile. These tips should be easily and fit, and can be connected by the introduction of the new board at an angle of 45 degrees with respect to the former, while slotting into place as you lower it. You can use your block shots or bar to encourage more tips in place if necessary.

End of row tips can be cut with the saw he has, and that makes the board where the cut should be made. Be careful to cut the card in the right direction that different saws can damage the top or bottom of the timber. Do not forget to use safety glasses as he does.

Step 6 - applied finishes

It is recommended to wait at least 48 hours before applying the final touches on its soil as gaskets, La Scotland. This will allow the soil to settle in the afterlife.

Use a miter box to help reduce their coverage and La scotland at an angle. Transition bars can also be used when your new floor is a door or other floor surface.

Congratulations! Now you know How to Lay Wood Flooring!

Read More... Résuméabuiyad