Tips For Painting Basement Walls

painting basement walls can go a long way to beautify an underground natural light confinement. With a little paint and imagination, a neglected space can be transformed into an office center, game room or media.

Painting basement walls is very convenient, because it protects against moisture, extending the life of your home. Paint the basement walls is a quick and easy project; However, basements painting presents challenges that other areas do not. Following these tips to avoid costly problems down the road.

Remove the old paint

If your basement walls have been painted previously and no cracking, chipping or peeling, it is a safe idea to remove the paint first. Use a wire brush or scraper to do the job. Older basements sometimes contain wood as part of the foundation and paint the wood should be removed.

Finish with defective equipment

Construction materials are eroded over time. When this occurs, the concrete disintegrates. Decline may go unnoticed. Use a sander or grinder to smooth the rough surface of the wall to reveal bulk materials.

Before painting, remove and replace the degraded material place with mortar or cement. This not only obtain a smooth surface, but also strengthen your basement.

Mold and mildew

Not only do these two potentially dangerous to your health, but also weaken the structural integrity of the basement substance. There are many chemicals on the market that can kill these two mongers organic disorders. Apply a base coat of paint to protect the paint before adding desired.

First of basement walls

First ensures that the paint remains on the wall. Cement paint absorbed by the porous surface. First fills the surface and prevents the paint layers to be absorbed. The ability to seal the paint is added.

To brush or not to brush

Apply the paint with brushes, rollers or spray guns. A paint sprayer is by far the fastest method, but some areas are sure to be missed. Rolls have the same dilemma; Also, while you roll the paint on a textured surface, you can create a lot of water splashing. Brushes do a good job on the first try. You will be able to control the amount of paint applied to all areas, and where paint is applied.